Can anyone suggest a solution for this problem? Customers are getting this message:

CURL ERROR: 35::Cannot communicate securely with peer: no common encryption algorithm(s).

Thanks much

The most generated errors being found on Opencart forum originates from contributed programming. The increased post counters are caused by redundancies of the same solutions that were already provided prior.

Regards,

Straightlight

Programmer / Opencart Tester

Code: Select all

```
Cipher Suites
# TLS 1.2 (server has no preference)
TLS_RSA_WITH_3DES_EDE_CBC_SHA (0xa) WEAK 112
TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA (0x16) DH 2048 bits FS WEAK 112
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA (0xc012) ECDH secp521r1 (eq. 15360 bits RSA) FS WEAK 112
TLS_RSA_WITH_AES_128_CBC_SHA (0x2f) WEAK 128
TLS_DHE_RSA_WITH_AES_128_CBC_SHA (0x33) DH 2048 bits FS 128
TLS_RSA_WITH_CAMELLIA_128_CBC_SHA (0x41) WEAK 128
TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA (0x45) DH 2048 bits FS 128
TLS_RSA_WITH_SEED_CBC_SHA (0x96) WEAK 128
TLS_DHE_RSA_WITH_SEED_CBC_SHA (0x9a) DH 2048 bits FS 128
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA (0xc013) ECDH secp521r1 (eq. 15360 bits RSA) FS 128
TLS_RSA_WITH_AES_128_CBC_SHA256 (0x3c) WEAK 128
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 (0x67) DH 2048 bits FS 128
TLS_RSA_WITH_AES_128_GCM_SHA256 (0x9c) WEAK 128
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 (0x9e) DH 2048 bits FS 128
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 (0xc027) ECDH secp521r1 (eq. 15360 bits RSA) FS 128
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 (0xc02f) ECDH secp521r1 (eq. 15360 bits RSA) FS 128
TLS_RSA_WITH_RC4_128_MD5 (0x4) INSECURE 128
TLS_RSA_WITH_RC4_128_SHA (0x5) INSECURE 128
TLS_RSA_WITH_IDEA_CBC_SHA (0x7) WEAK 128
TLS_ECDHE_RSA_WITH_RC4_128_SHA (0xc011) ECDH secp521r1 (eq. 15360 bits RSA) FS INSECURE 128
TLS_RSA_WITH_AES_256_CBC_SHA (0x35) WEAK 256
TLS_DHE_RSA_WITH_AES_256_CBC_SHA (0x39) DH 2048 bits FS 256
TLS_RSA_WITH_CAMELLIA_256_CBC_SHA (0x84) WEAK 256
TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA (0x88) DH 2048 bits FS 256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA (0xc014) ECDH secp521r1 (eq. 15360 bits RSA) FS 256
TLS_RSA_WITH_AES_256_CBC_SHA256 (0x3d) WEAK 256
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 (0x6b) DH 2048 bits FS 256
TLS_RSA_WITH_AES_256_GCM_SHA384 (0x9d) WEAK 256
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 (0x9f) DH 2048 bits FS 256
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 (0xc028) ECDH secp521r1 (eq. 15360 bits RSA) FS 256
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (0xc030) ECDH secp521r1 (eq. 15360 bits RSA) FS 256
```

The most generated errors being found on Opencart forum originates from contributed programming. The increased post counters are caused by redundancies of the same solutions that were already provided prior.

Regards,

Straightlight

Programmer / Opencart Tester

How can we change in CURL to make the app use TLS 1.2, i've seen posts saying to edit the Authorize.Net AIM file (module) and make it specifically use TLS 1.2, but when I do that the shopping cart just hangs at please wait, when I try and process the test 4111 1111 1111 1111 visa.

Does the Authorize.NET AIM extension in OC 1.5.4 work with TLS 1.2?

If you want to try forcing the curl connection to use TLS 1.2, you can adding this in the /catalog/controller/payment/authorizenet_aim.php file:

------------------------------------------------------------------------------

AFTER:

curl_setopt($curl, CURLOPT_TIMEOUT, 10);

ADD:

curl_setopt($curl, CURLOPT_SSLVERSION, 6);

------------------------------------------------------------------------------

1. Server SSL protocol. You need to make sure that only TLSv1.2 is active. To do so first run this command to see which protocols are active

Code: Select all

`/usr/local/psa/bin/server_pref -s | grep ssl-protocols`

Then run this to make only v1.2 active

Code: Select all

`/usr/local/psa/bin/server_pref -u -ssl-protocols TLSv1.2`

Restart your server

2. This has to do with Opencart and as suggested by Johnathan it will fix the CURL Error 35: curl unable to communicate securely with peer

Open /httpdocs/catalog/controller/payment/authorizenet_aim.php

add this line (around line 111)

Code: Select all

`curl_setopt($curl, CURLOPT_SSLVERSION, 6);`

Code: Select all

`curl_setopt($curl, CURLOPT_CONNECTTIMEOUT, 10);`

thanks all -- a

Any official documentation you could provide based on these validations that needs to be done for June 2018 from PayPal?Now you should be good. Remember PayPal will enforce this about June 2018, so u better be done now.

The most generated errors being found on Opencart forum originates from contributed programming. The increased post counters are caused by redundancies of the same solutions that were already provided prior.

Regards,

Straightlight

Programmer / Opencart Tester

viewtopic.php?f=20&t=205053&p=726297#p726319

Had to add this line to controller/payment/authorizenet_aim.php

Code: Select all

`curl_setopt($curl, CURLOPT_SSLVERSION, 6);`

Otherwise your get an error! The curl_setopt($ch, CURLOPT_SSLVERSION, 6); is requesting TLS v 1.2

Why not try adding it in controller/extension/payment/pp_pro.php - around line 135.

Let me know if it works.

I have full control of my hosting environment and running this command in SSH

Code: Select all

`/usr/local/psa/bin/server_pref -s | grep ssl-protocols`

Code: Select all

`ssl-protocols: TLSv1.2`

Before doing this, I had three versions of TLS, what's to say which one is the default? And what is to say if Authorize or PayPal are asking for the default version. I only know that the de facto behavior was not to ask for the highest version AND that even after deactivation of lower versions, it still wanted us to specify the SSL version in the code. Go figure.

With respect to pay-pal, currently it is working for me without any changes to the code (using PP Express Checkout), but I am not sure what will happen come June 30th. I would like to know if others tried this in sandbox mode.

Users browsing this forum: No registered users and 51 guests